Hollis has become a leader in the sidemount market. It is not just a fad and not just a tool for cavers, it’s here to stay and is growing. The SMS 75 is an evolution from years of sidemount development, which started with the...

Protect the end of your second stage and hose when the second stage is disconnected from the hose Includes both male and female plugs Machined Delrin construction Not to be used under pressure

Converting your regulator/hoses to 1/4” NPT has many practical application in diving as well as your garage or shop Used with surface supplied umbilicals, switch blocks, comm gear and pneumatic tools Viton o-rings where applicable 1/4” NPT male to 3/8”-24 UNF male Chromed brass...

Converting your regulator/hoses to 1/4” NPT has many practical application in diving as well as your garage or shop Used with surface supplied umbilicals, switch blocks, comm gear and pneumatic tools Viton o-rings where applicable 1/4” NPT male to 3/8”-24 UNF female Stainless steel...

The extender is useful if there is not enough room on the regulator’s first stage for your computer transmitter Chromed brass construction with Viton o-rings High pressure only – maximum 5000 psi Cleaned for use with up to 40% pre-blended Nitrox (1) 7/16”-20 male...

9/16”-18 male to 3/8”-24 male Convert a standard low pressure regulator hose so that both ends have 3/8” male threads Brass construction with black chrome finish Viton o-rings (where applicable) Low pressure use only - below 200 psi

Install between low pressure regulator hose and second stage Reduce hose torque on the second stage leading to increased comfort and reduced jaw fatigue and clinching Rotating swivel action Assembled with Viton o-rings Low pressure use only – below 200 psi

Convert any standard regulator hose to a “Drysuit Style” QD hose Installs to the second stage end of a regulator hose Chromed brass construction with Viton o-rings Low pressure use only - below 200 psi Compatible with: Swedish CEJN couplers as found on many...

Retains three standard diameter (11-13 mm) low or high pressure hoses Two-way swivel Delrin and stainless steel construction

Are you tired of feeling like your hose is trying to push your regulator out of your mouth? Get the new Miflex DS (Dual Swivel) hose and take comfort and flexibility to a new level. The 60º swivel ball joint on the second stage...

Lightweight and flexible low pressure hoses Multi-layer construction Excellent resistance to abrasion Kink-resistant design Approved for use for use with up to 40% oxygen Individually tested at the factory EN250 approved Individually marked with the Miflex logo and date code Manufactured in Italy Inner...

Lightweight and flexible low pressure hoses Multi-layer construction Excellent resistance to abrasion Kink-resistant design Approved for use for use with up to 40% oxygen Individually tested at the factory EN250 approved Individually marked with the Miflex logo and date code Manufactured in Italy Inner...

Lightweight and flexible low pressure hoses Multi-layer construction Excellent resistance to abrasion Kink-resistant design Approved for use for use with up to 40% oxygen Individually tested at the factory EN250 approved Individually marked with the Miflex logo and date code Manufactured in Italy Inner...

Lightweight and flexible low pressure hoses Multi-layer construction Excellent resistance to abrasion Kink-resistant design Approved for use for use with up to 40% oxygen Individually tested at the factory EN250 approved Individually marked with the Miflex logo and date code Manufactured in Italy Inner...

When you need something more permanent than a clip, a Quick Link is what you want. Useful for attaching chain to small anchors 316 grade stainless steel construction

When you need something more permanent than a clip, a Quick Link is what you want. Useful for attaching chain to small anchors 316 grade stainless steel construction

316 grade stainless steel construction

Precision manufactured to the exact specifications of Joe McGrath’s original Highland Millwork bands Deburred and polished edges to protect your cylinder paint/finish 18 gauge (.048 in) 304 grade stainless steel Final finish completed by hand Fusion welds, passivated and polished Polished #4 stainless steel...

SCUBAPRO’s new S-Tek Pure Harness with Back Plate follows the DIR (Doing It Right) approach to BPW diving with its streamlined, minimalist design. It features a continuous-web harness with lots of stainless steel hardware, including a waist buckle, two pre-bent D-rings on the shoulders,...

The Synergy Mini is a downsized version of the Synergy Twin mask. Its smaller frame and skirt create a comfortable and watertight seal for divers who have had issues getting the full-sized Synergy Twin to seal on their faces. The Synergy Mini benefits from...