Available in three sizes Spools are injection-molded with glass-filled nylon #24 hi-viz yellow nylon 16 strand line (breaking strength 120 lbs/55 kg) 4” stainless steel double-ender bolt snap with 18-8 SS internal springs

First Stage Quick Disconnect • Quick and convenient way to change hose lengths between dives Installs between first stage and regulator hose Lock-down screw to prevent accidental disconnection Flow rate = 800 lpm / Low-pressure use only – below 200 psi First Stage Quick...

Flared edges are easier to grip and keep fingers out of the way Large center hole fits gloved thumb 304 stainless steel with anodized surface #24 orange line, 8 strand, with breaking strength of 168 lbs (76 kg) 4” stainless steel double-ender bolt snap...

Standard size retractor Lock the cable open, closed or anywhere in the middle Attach to gear with stainless steel split ring or nylon lanyard Attach to diver with Delrin snap hook attachment Dimensions 2.6 x 2.2 x 0.8 in : 66 x 56 x...

Designed to fit the curve of a forearm Three separate writing surfaces with two fold up leafs Carbon stick pencil Dimensions 4.25” wide x 4.0" tall (10.8 x 10.2 cm) Two methods for attachment included: hook-and-loop strap and bungee cords

This product is sold by Meter High-grade 2 in (50 mm) nylon webbing sourced specifically for building technical harnesses Softer than standard weight belt webbing Less abrasive on exposure suits

The CL13 is similar to the popular CL14 Mini Retractor but it sports a larger clip, stronger spring force and less extension 1 in (25 mm) snap clip attaches to larger D-rings Recommended for medium-sized flashlights (3C to 8AA size) Dimensions 2.0 x 1.5...

While they serve many purposes, Spring Hooks are a strong, secure way to attach accessories to your harness or BC. 316 grade stainless steel construction

Side-Slide weight pockets are an easy way to add lead to a 2 in (50 mm) webbed harness, usually associated with a backplate and a wing. Large, side-squeeze 2 in (50 mm) buckles on the front of the pocket for easy release of weights...

2 Pack Sidemount divers, technical divers, and free divers, this product is for you! Highland Weight Plates are a quick and easy way to add blocks of lead to a 2 in (50mm) wide piece of webbing such as a harness or weight belt....

Protect your hoses from premature failure. Secure attachment of a clip without causing potential damage to the hose For use with all low pressure scuba hoses with an approximate 0.5 in (13 mm) diameter Includes 2 break-away straps

3/8”-24 female x 9/16”-18 male Connect two regulator hoses together to make one longer hose Low profile 11.5 mm height Brass construction with black chrome finish Viron o-rings (where applicable) Low pressure use only - below 200 psi

The extender is useful if there is not enough room on the regulator’s first stage for your computer transmitter Chromed brass construction with Viton o-rings High pressure only – maximum 5000 psi Cleaned for use with up to 40% pre-blended Nitrox (1) 7/16”-20 male...

Install between standard regulator hose and second stage Slide machined Delrin collar to shut off gas flow Commonly used with deco rigs, stage bottles & drysuit inflation 9/16”-18 UNF male inlet to 9/16”-18 UNF female outlet threads Low pressure use only - below 200...

XS Scuba Replacement Knife Straps Pair Standard on XS Scuba Knives Depth Compensating Design Fits Most Knife Sheaths 22" (55.9 cm) Long, Adjustable Length Quick-Release Buckles Black Rubber Straps

LED Glowsticks not only provide an added element of safety to your night dive, they save money, and are good for the environment too! Gone are the days of buying and throwing away one-time use plastic, chemical light sticks. A long-lasting LED powers fourteen...

Protect your regulator and gauges with the padded Leeward 6 regulator bag. An internal zippered pocket is the perfect place to hold port plugs, hex keys, tie wraps and mouthpieces Hook-and-loop hold downs in opposite corners keep your regulator system stationary External D-rings are...

10 Piece Pack Highland Cave Markers are strong and highly visible. They are a good value because they are of excellent quality at an affordable price. You can easily write on them with a permanent marker All points have been rounded off for ease...

10 Piece Pack Highland Cave Markers are strong and highly visible. They are a good value because they are of excellent quality at an affordable price. You can easily write on them with a permanent marker All points have been rounded off for ease...

3/8”-24 female x 3/8”-24 male Extend the placement of LP port away from first stage 16 mm height Brass construction with black chrome finish Viton o-rings where applicable Low pressure use only - below 200 psi